Any Flat Surface Will Do - Collage On Anything!

Art Magnet Made With Recycled Laminate Sample

There's a running joke in our household that if something is flat and not nailed down it will probably end up in one of my collages.  

As the "Queen of Recycling" (a title given me by friends and customers), I always look at recyclable materials with a view to whether or not they'd make a good substrate for my art. 

Case in point, about 12 years ago I was in the home improvement store looking at those little laminate sample chips you can pick up when you are thinking of replacing your kitchen countertop.  They come in a myriad of colors and textures and are strong and durable.  They have rounded corners typically and a hole punched in them, and are about 1.5" X 2" or so.  Initially, I used them to make art jewelry pendants which I sold on Ebay and Etsy for several years.  

Eventually, I found some larger pieces that were about 3.5" X 5" and started making larger art magnets with them.  I hadn't made any in quite some time, when I recently came across a stash of them in my studio and decided to play around with them again.  I had been wanting to use up some of my Gelli plate prints that I have amassed, so I thought I'd make some fun and funky art magnets.  Here's what I did:

Here's a couple photos of the fronts and backs of the laminate pieces.  I have chosen to do the art on the back (unfinished) side because it has a more grippy surface than the slick "good" side of the laminate.  Plus, that way the finished piece will have a really nice look to the back side as well as the front.  

Laminate Samples - Front

Laminate Samples - Back

I cut my Gelli plate prints a bit bigger than the size of the laminate sample, which is about 3.5" X 5."  I chose some of the brighter, more colorful prints I have because I was planning on making these collages into some of my smart-ass magnets and I wanted them to be fun and playful.  

To ensure good adhesion, I used heavy body gel medium (Golden) to glue the prints to the backside of the laminate and let them dry.  Then I trimmed around the edges of the laminate to remove the excess paper.

Collaged elements, doodling, lettering, and other paint treatments came next.  I ran a stamp pad around the edges of the piece to finish the magnets off and then sprayed each with three coats of high gloss sealant.  Two flat, sheet magnets (the kind used for business card magnets) were put on the back of each piece.

Back Of Lamnate With Two Magnets Attached

Art Magnet Made With Recycled Laminate Sample

Art Magnet Made With Recycled Laminate Sample

This was a fun and quick project with great results.  It has reminded me that I should re-visit my previous types of work from time to time, bringing with me the latest techniques and tools I am using.  It brings new life and a new spin to the tried and true.

Thanks for visiting and have an artful day!

Much love always!
Joanna